Superclock - version for wall case PT1
It has screw holes on a 76mm square; it has a thin film to be pierced (you may not remove it if instead you use only 2 screws or glue). On the back it has a couple of wires to connect to 220V with 2 terminals (not supplied; also because in the box there may already be connections to be exploited).
The yellow version (made on request) at the time of writing these notes is still to be listed in the purchase form (end of
SuperClock page ...) but you can choose the gray with white LEDs and if you want the yellow indicate it in the comments.
e qui confrontata con un coperchio scatola 11x11 cm
(C) 2022 VisualVision
