All the ways TXtemp TXsoil TXdata can work...
 
A generic work environment can include any number of TXtemp TXdata and TXsoil devices that (usually) periodically turn on, send their measurements, and turn off. 
 
We have tried to build an organic system so that whoever gets a TXtemp or TXsoil sensor, or a bridge for ModBus sensors and devices like TXdata can immediately use them with all VisualVision products without wasting time in configurations. 
At the same time, thanks to the HTTP and MQTT industry standards, they can be used with any automation or domotics
 
With VisualVision products 
TXtemp, TXdata and TXsoil can be connected to a Display, a concentrator / retransmitter or a Control HUB, via transmission at 433Mhz (typically more efficient in terms of distance and consumption) or via WiFi (greater number of channels available). 
To be more precise: 
- DisplayRX when it is "only" necessary to view the data on a display, even in rotation 
- RXTXeasy GSM when you want to periodically transmit a "concentrate" of data to a remote server; this transmission can take place in WiFi / HTTP or WiFi / MQTT when you want to use it as a "repeater" of low consumption TXtemp, TXdata and TXsoil elements operating in 433 Mhz. Or it can be done via GSM / HTTP if WiFi / Internet is not available (using a single GSM SIM to send data to many devices). 
- ControlHUB additionally when you want to use the data to perform conditional actions (through expressions and variables; e.g. by activating relays and/or ModBus devices) 
 
With any automation in WiFi / HTTP or WiFi / MQTT 
The use intertwined with our products has been designed for maximum immediacy and to give "something more". 
At the same time, we know that there are many existing automations built with other products, and many products for automation that can be integrated and that can offer other functions, and therefore that it is important to offer a standard system to be able to use everything without problems. 
Thanks to the industrial standards HTTP and MQTT, TXtemp, TXdata and TXsoil  as well as DoorOpen/DoorSwitch and 8888-Display can be used in any automation or domotics. 
We have tried to simplify the way we implement these standards as much as possible, so as not to kill flies with a cannon. 
 
Here are the quick manuals available for TXtemp, TXdata and TXsoil
- connection and data format manual, HTTP / MQTT, for TXtemp, TXdata, TXsoil 
 
 
Here are the quick manuals for the other products: 
- connection and control manual, WiFi HTTP and MQTT for DoorOpen/DoorSwitch 
- connection and control manual, WiFi HTTP and MQTT for QueueNumber and MultiQueue 
- connection and control manual, WiFi HTTP and MQTT for Orologio/SuperClock 
 
- connection and control manual, Serial RS232 for 8888-Display (ModBus WiFi HTTP MQTT) 
- connection and control manual, ModBus for 8888-Display (RS485 ModBus WiFi HTTP MQTT) 
- connection and control manual, WiFi/HTTP for 8888-Display (ModBus WiFi HTTP MQTT) 
- connection and control manual, WiFi/MQTT for 8888-Display (ModBus WiFi HTTP MQTT) 
 
- manual with data format for data sent by HTTP for RXTXeasy 
- manual with data format for data sent by HTTP for ModBusEasy 
 
 
Home page - WFeasy Hardware Solutions Home - Hardware by VisualVision 
VV Automazione Domotica MQTT 
(C) 2022 VisualVision